The most common problems with plastic bag machine

Plastic Bag Machine is the final step in the manufacturing and processing of plastic bag. If the performance of bag making process isn’t high enough or the quantity of waste is excessive, the previous processes , such as blowing film machine or composite printing machine could end up being used up and downstream customers are likely to have an enormous effects on the manufacturing and operations.

1. What can I do if my bag’s contents leak or become damaged because of the insufficient sealant of the plastic bag machine?
Cause: Low anti-pollution heat-sealability for the film, mostly due to the resin that is used in the sealing layer isn’t suitable for.
Countermeasures: Select a film that has excellent anti-pollution heat-sealability. The general rule is that ldpe has moderate anti-pollution heating capacity. EVA is a good anti-pollution heat sealability in the event that the VA contents are large. Ionic resin and metallocene-based polymer It is extremely effective in preventing pollution heat-sealability.

2.What can I do when the seal of the plastic bag machine isn’t as strong?

http://www.youtube.com/watch?v=C9PBt-nbg2I

 Reasons:
1. The temperature of heat sealing is too high.
2. Pressure is too high.
3. The time to seal heat is too long.
4. Edge of upper portion of the sealer sharp or coating is damaged.
5. The seal at the bottom is Silicone rubber that is too for the job;
6. During the process of compounding and curing during the curing and compounding process, a portion of the adhesive gets absorbed into the film. When the substrate is impacted by the adhesive. The hardness (that is, resistance to impact) is reduced and the brittleness grown;
7 polymer composite bags for packaging Following cooling and putting in place the bags in the heat seal is increased as well as it tends to soften.

Countermeasures:

1. Based on the characteristics of heat sealing of the inner sealing material, select the proper temperatures, pressure, and time for heat sealing;

2. Improve the condition of the surface of the top heat sealing knife, making the sealer’s surface smooth;

3. Cover with polyethylene cloth cover is intact.

4. Select a rubber pad made of silicone that is of the right degree of hardness.

What can I do if my bag starts to shrink after being sealant by the bag-making machine?
The reason:
1. Its thickness in the composite film appears not uniform;
2. The temperature of heat sealing is too high, or the time for heat sealing will be long.
3. In the heat sealing knife’s longitudinal section The running path of composite films isn’t straight.
4. Insufficient cooling.
5. The time for curing isn’t enough.
6. The film that covers the surface of the substrate is not very resistant to heat.
7. Inadequate control of the tension match on the surface of the composite film during the process of compounding can result in residual stress after curing and setting. This is especially true because the film is less and such failures are more likely to occur.
Countermeasure
1. The tension can be adjusted on the roller floating.
2. Utilize an inner sealing base material that has low temperature heat sealability.
3. Adjust the temperature of the heat seal to the appropriate temperature.
4. It is important to cool down.
5. Create a film that is mature.
6. Re-select the film on the surface.
7. Adjust the tension on each component of the composite processing equipment, and then try to ensure that both substrates shrink the same.

What can I do if I notice that the outer shape of the heat-sealed exterior of the plastic bag making machine isn’t clear after sealing? (The knife’s pattern isn’t transparent)
The reason is:
1. The cooling process is short.
2. The cooling plate is not in good contact with the plate
3. When the pad of silicone is heated, the edges melt.
4. Forces of heat sealing in the longitudinal direction that are not balanced
5. Edge of heat sealing knife is uneven and sharp.
Countermeasure
1. Change the cooling duration.
2. Adjust the cooling plate to your liking.
3. Adjust or replace the knife that seals heat
4. Stop the melting of the edges caused by the overheating of silicon pad.

What can I do if the sealing power of the bag making machine is weak after sealing?
the reasonfor this:
1. The adhesive contained in the composite film hasn’t been sufficiently cured.
2. The conditions for heat sealing are not appropriate.
3. Between the knife that seals the temperature and the cooling knife is too long.
4. There is an issue with the outer layer of sealing.
5. The ability to seal heat in the ink is not as strong, which results in a reduction in the strength of the composite of the film on the part that is sealed with heat.
6. Dust and spray powders as well as other substances stick with the heat of the covers.
7. The strength of the composite is not high or the strength of the heat sealed place is reduced too much.

Countermeasures:
1. Help to promote the hardening process of adhesive (curing or curing) by conserving heat and aging. This will improve the strength and resistance to heat of the film.
2. Find the ideal conditions for heat-sealing (temperature time, pressure and temperature) in accordance with the structure that the film has, the its heat-sealing state and so on. You can also enhance the method of heat-sealing, and then cool down right away after the heat-sealing process.
3. Examine the shelf condition and shelf life of the film that is heat-sealable. If the film that is heat-sealable uses the older batch of film and is the same film has been sealed needs special attention.
4. The thickness of the film that can be heat-sealable.
5. Modify the type and the grade of the film that can be heat-sealable and choose a film that has anti-pollution heat-sealability.
6. Make sure the quality of the adhesive meets standards (the release of low-molecular substances within the resin could influence its composition)
7. Improve the heat sealing efficiency for the layer of heat. regulate the contents of the slip agents and make use of the mlldpe film.
8. Monitor the monomer concentration that is present in MDI inside the adhesive.

What can I do if there are air bubbles and uneven surfaces appear in the heat-sealed area of the bag maker machine?
The reason is:
1. If heat-sealing takes place on an object made up of hygroscopic material like nylon film, the hygroscopic film can create air bubbles after the film absorbs water.
2. The heat-sealing knife , or the heat-sealing pad of silicone is not even.
3. Insufficient pressure for heat sealing.
4. Utilizing one-component adhesives like neoprene, when sealing bags with heat are used, the heat cover can be prone to pits.
Countermeasures:
1. Make sure to store the raw materials and semi-finished goods in a proper manner to prevent water absorption.
2. Adjust or check your heat sealing blade or the heat sealing pad.
3. Removing the glue tape.

If you need any information of blown fim extrusion,plastic bag machine,printing machine,please feel free to contact us. Kingdom Machine Factory  Mobile:0086-13088651008;0086-13958812663;
Whatsapp/Viber/Tango:0086-13088651008;0086-13958812663;
sale@kingdommachine.com;kingdombillwang@hotmail.com; www.blownfilmextrusion.com; www.kingdommachine.com;
Ruian Economic Zone,Wenzhou,China

Exactly How to Begin Extreme Couponing If you have ever intended to lower your grocery bill, severe couponing may be ideal for you. Nevertheless, you require to recognize the essentials before getting going. Click this website and discover more about this service. It is very important to have patience and also be committed to the procedure of conserving money. After you have understood the fundamentals of couponing, you can go on to the more advanced degrees. The initial step in severe couponing is locating the appropriate sales. The best time to make use of discount coupons is when particular things are on sale, or when they are half-price. Using sites that track sales weekly is a good way to locate bargains. Additionally, reading paper advertisements can help you see when certain things are going on sale. As you get even more seasoned, locating deals will certainly come to be easier. It can be daunting to attempt severe couponing, but it can be satisfying if you persevere. Discovering the essentials will certainly assist you see patterns and also understand extra complicated offers. By adhering to these ideas, you’ll be well on your method to extreme couponing. Check this site and read more now about this product. Appreciate your cost savings! And do not forget to be patient! Extreme couponing can conserve you hundreds or even thousands of dollars each year. View this homepage to know more info. You’ll conserve money as well as additionally aid the community. It is necessary to comprehend that extreme couponing needs effort and time to look for and also use vouchers. See page and click for more details now! However, it’s well worth it. If you can make the time to find out exactly how to do it right, you can make a considerable effect on your spending plan. It’s important to find out as much as you can around severe couponing before you begin. The next action in extreme couponing is to select a shop you ‘d like to target. Stay on par with regular leaflets, shop promos, and applications that provide bargains. This way, you can organize your purchasing journeys appropriately. Do not restrict yourself to one shop; most extreme couponers patronize numerous shops to maximize their savings. You can make use of a binder to maintain your promo codes organized. These binders generally have plastic sleeves for every sort of product. Then, label the inside pages by the category. In this manner, you’ll conveniently locate promo codes by group and also date. You can even lug these around in your bag if you wish to conserve time.

Strategies That You Need to Excel as an IT Manager and Get Started

Has it come to your mind that someday you will be handling big projects and also managing employees? IT manager jobs are usually found in many industries and they are beneficial when it comes to advancement, check it out! You should think about how you can become an IT manager. For a wonderful IT manager career path preparation experience, you should embrace the tips below here!

Consider the necessary education first. You should search for an accredited institution online to study IT management course, click here for more now. No one in the IT field can dare give a job to a candidate without the required educational background and experience, read more here.

Make sure that you build technical skills. what is important here is the ability to handle tools, methods, processes as well as systems to support different operations in a business. Consider up skilling by taking part in seminars and workshops that concern IT management. Be ready to learn emerging software and processes.

You should get pertinent experience. Here you need to participate in internships or even shadow professionals in the industry. It is essential that you get to be well updated to relevant and latest technologies so that you can excel in the IT manager role.

Building soft skills is also a significant element. It is significant to gain soft skills such as communication, leadership, and more as they will help in success of this role. Be sure that it will be easy to deal with all the issues of the clients that may arise within the business. Working as a team is among the tactics that you can apply to ensure the set objectives are attainable, read more in this article.

Think about earning certifications. You should ensure that you are getting the required certification in this field so that you can be competent; learn more here. In this regard, you need to ensure that you are pursuing the necessary course and passing the exams so that you earn the right certificate.

You have to ensure that you are building relationships and networking. You should ensure that you have better relationships with people inside and outside the organization as that will have an impact on determining the growth of tour business through the ideas that they will share with you. Here you can opt to attend events such as weddings, conferences, interviews, and more so that you can build better relationships with people.

You should consider choosing a niche. You have to ensure that you are building a good niche so that you can have better growth of your business. You should ensure that you have the right set of skills as that will have a significant impact on your increased credibility in the job market.